EART60071 Measuring and Predicting 2
EART60071 Overview
- 15 credits
- The University of Manchester
- Semester 1 2026/27
- Postgraduate
- Lectures and computer practicals
EART60071 Measuring and Predicting 2 is a Semester 1 module at The University of Manchester on using numerical models scientifically.
- Assessed by One timed online assessment on Canvas carries the entire module mark.
- Practice route The formative version opens on 11 December 2026 and can be repeated.
- Core skill Explain why a model produces its output, then check it against the physics.
- Numerical habit Test every step size against convergence and the CFL limit before trusting a plot.
What you get in the full EART60071 Exam Bible
- 10 chapters, 47 pages — every examinable topic, week by week
- 30 original practice questions, most with model answers in the Summative online assessment format
- 10 worked examples, solved the way EART60071 marks
- 17 computed figures, redrawn from the course’s own numbers
- Exam-morning plan for the Summative online assessment (100%) — what to revise last, where marks are lost
Free on this page: assessment table, chapter map, one worked example, key terms, FAQ. The rest is in the full exam bible.
How EART60071 is assessed
| Component | Weight | Format |
|---|---|---|
| Summative online assessment | 100% | Timed two-hour online assessment on Canvas, taken under examination conditions during the examination period. It contains 10 questions, follows the same format as the formative assessment and is open book, so you may consult your own notes. Generative AI is prohibited. |
| Formative online assessment | 0% | Practice assessment released on Canvas at 15:00 on Friday 11 December 2026, with the same format as the summative assessment: 10 randomised questions, feedback after each attempt and your highest score retained. It does not contribute to the module mark. |
Both weights are taken from the module's 2026/27 syllabus and assessment guide. The exact date and time of the summative assessment are confirmed through the University examination timetable and Canvas.
What other students are asking about EART60071
- Where can I find lecture notes or study guides for EART60071 at manchester?
- The EART60071 study guide in AskSia Library covers Measuring and Predicting 2 in 10 chapters, with the assessment table, a chapter-by-chapter topic map, key terms and a worked example, free to read on this page.
- Is there a final exam in EART60071?
- No final exam is listed in the offering this AskSia Library guide is built from; EART60071 is assessed by Summative online assessment 100%.
- What does EART60071 cover on forward euler, convergence and numerical error?
- In AskSia Library's EART60071 guide, the Forward Euler, Convergence and Numerical Error chapter explains turning a rate equation into a stepping rule, the difference between sampling an exact curve and choosing a time-step, convergence, negative values from oversized steps and the oscillator's growing amplitude.
- What does EART60071 cover on advection, the cfl number and numerical diffusion?
- In AskSia Library's EART60071 guide, the Advection, the CFL Number and Numerical Diffusion chapter explains the advection equation, the first-order upwind scheme, the Courant number and its stability limit, numerical diffusion and how to tell smoothing from instability.
- What does EART60071 cover on air pressure, lapse rates and humidity?
- In AskSia Library's EART60071 guide, the Air Pressure, Lapse Rates and Humidity chapter explains molar and density versions of the gas law, adiabatic cooling, parcel and environmental lapse rates, vapour pressure, the Clausius-Clapeyron curve, relative humidity and mixing ratio.
Current EART60071 dates
| Date | Item | Control |
|---|---|---|
| Thursday 26 November 2026, 09:00 | Parcel modelling practical: answers and model output released | Use them to check your own runs against example output. |
| Thursday 3 December 2026, 09:00 | Gaussian plume practical: answers and model output released | Compare your saved plots with the example output. |
| Friday 11 December 2026, 15:00 | Formative online assessment opens | Same format as the summative assessment; attempts do not count towards the mark. |
| Wednesday 16 December 2026 | Final online drop-in | For practical results, the formative assessment or revision topics. |
Dates are as published in the module's Semester 1 2026/27 Canvas pages. Confirm exact deadlines and submission settings in the live LMS.
What EART60071 covers
Ten chapters follow the module's modelling progression, from numerical methods and the server workflow through atmospheric thermodynamics, aerosol and cloud physics, plume dispersion and column modelling to rotating-fluid dynamics.
Environmental Models and the Practical Workflow
Why numerical experiments complement observation, the four model families used in the module, Lagrangian and Eulerian frames, controlled comparisons and the server routine.Environmental Models and the Practical Workflow sets out why the module models at all and how every practical is run.
- Why numerical experiments complement observations
- Four families of environmental model
- Lagrangian paths and Eulerian grids
- Designing a controlled comparison
- SSH, SFTP and the local versus remote distinction
- Keeping a practical record
Forward Euler, Convergence and Numerical Error
Turning a rate equation into a stepping rule, the difference between sampling an exact curve and choosing a time-step, convergence, negative values from oversized steps and the oscillator's growing amplitude.Forward Euler, Convergence and Numerical Error covers the first practical's central lesson: running a model involves far more than placing its equation on a computer.
- The decay equation and its exact solution
- Deriving the Forward Euler update
- Plotting interval versus numerical time-step
- Convergence and its computational cost
- Negative values from an oversized step
- Growing amplitude in the oscillator
Advection, the CFL Number and Numerical Diffusion
The advection equation, the first-order upwind scheme, the Courant number and its stability limit, numerical diffusion and how to tell smoothing from instability.Advection, the CFL Number and Numerical Diffusion treats the transport equation that every grid-based model in the module relies on.
- The advection equation as transport without mixing
- The first-order upwind update
- The Courant number and its meaning
- Stability needs C no greater than one
- Numerical diffusion below the limit
- Recognising instability in a plot
Air Pressure, Lapse Rates and Humidity
Molar and density versions of the gas law, adiabatic cooling, parcel and environmental lapse rates, vapour pressure, the Clausius-Clapeyron curve, relative humidity and mixing ratio.Air Pressure, Lapse Rates and Humidity rebuilds the first half of the module's notes on atmospheric quantities as a set of calculations.
- Molar and density versions of the gas law
- Adiabatic expansion and cooling
- Parcel versus environmental lapse rate
- Two-stage dry and saturated ascents
- Saturation vapour pressure and relative humidity
- Water-vapour mixing ratio
Aerosol Growth, Visibility and Particulate Matter
Hygroscopic growth and the simplified Köhler relation, solute and curvature effects, extinction and visual range, and particulate mass loading in PM10 and PM2.5 classes.Aerosol Growth, Visibility and Particulate Matter follows a soluble particle as the air around it moistens and asks what that growth does to the view and to air-quality numbers.
- Hygroscopic particles and their wet diameter
- The solute and curvature factors in the Köhler relation
- Solution density and wet diameter
- Extinction coefficient and visual range
- Particulate mass concentration
- PM10 and PM2.5 under the simplified convention
Parcel Models and Cloud Droplet Activation
The coupled equations of the adiabatic parcel model, the Kelvin effect, Maxwell growth, size bins and log-normal modes, and the updraft, humidity and sea-salt experiments.Parcel Models and Cloud Droplet Activation explains the Fortran parcel model used in the second practical and how to read its experiments.
- The adiabatic parcel and its assumptions
- Pressure, cooling and latent heating
- The Kelvin equation and curvature
- Maxwell growth and the water budget
- Size bins and log-normal aerosol modes
- Updraft, humidity and sea-salt experiments
Atmospheric Stability and Gaussian Plume Dispersion
Parcel versus environmental lapse rate, stable, neutral and unstable air, looping, coning and fanning plumes, and the simplified advection-diffusion solution with its Gaussian widths.Atmospheric Stability and Gaussian Plume Dispersion connects the lapse rates of the previous chapters to air quality.
- Buoyancy from a parcel-environment temperature difference
- Stable, neutral and unstable air
- Looping, coning and fanning plumes
- Simplifying the advection-diffusion equation
- Gaussian widths and stability
- Humidity and particulate mass in the plume practical
Single-Column Models, Warm Rain and Ice
Time splitting between process and transport steps, conserved variables and potential temperature, collision and coalescence, ice-nucleating particles and orographic precipitation.Single-Column Models, Warm Rain and Ice explains the Week 4 model of moist air lifted over a hill.
- Time splitting between process and transport steps
- Conserved variables and potential temperature
- Transport at wind speed minus fall speed
- Collision and coalescence in warm rain
- Ice-nucleating particles and desert dust
- Orographic cloud and deeper clouds
Pressure Gradient, Coriolis and Balanced Flow
Pressure-gradient force per unit volume, the Coriolis parameter and deflection, the horizontal momentum equations, geostrophic balance and gradient wind around lows and highs.Pressure Gradient, Coriolis and Balanced Flow applies Newton's second law to a simplified horizontal fluid on a rotating Earth.
- Newton's laws and forces in a fluid
- Pressure-gradient force per unit volume
- The Coriolis parameter and deflection
- The horizontal momentum equations
- Geostrophic balance
- Gradient wind around lows and highs
Vorticity, Gravity Waves and Shallow-Water Flow
Relative and absolute vorticity, shallow-water gravity-wave speed and tsunamis, barotropic instability, orographic Rossby waves and equatorial waves.Vorticity, Gravity Waves and Shallow-Water Flow covers the phenomena that appear in the shallow-water practical.
- Gravity waves and their restoring force
- The shallow-water wave speed
- Tsunamis approaching the coast
- Relative and absolute vorticity
- Barotropic instability on a jet
- Orographic Rossby waves and equatorial waves
Its emphasis is not on writing a model from scratch but on understanding what a model assumes, designing controlled experiments with it, interpreting its output and recognising its limitations and numerical artefacts.
Each teaching week pairs a lecture on one modelling approach with a computer practical in which you download model code, change its inputs on a Linux server and analyse the results, usually with Python plots.
The modelling progression runs from simple numerical models, where Forward Euler, convergence, numerical diffusion and the CFL stability limit are introduced, to a parcel model of cloud-droplet formation on aerosol particles, an empirical Gaussian plume model of pollutant dispersion, a single-column model of orographic cloud and precipitation, and a shallow-water model of rotating fluid dynamics.
Two chapters of lecture notes supply the quantitative backbone, each with practice questions and worked answers: one on pressure, temperature, humidity, visibility and particulates, and one on dynamical models, covering pressure-gradient and Coriolis forces, balanced flow, vorticity and gravity waves.
Assessment is a single summative online assessment worth the whole module mark: a timed two-hour Canvas assessment of ten questions taken under examination conditions in the January examination period.
It is open book, so your own notes may be consulted, and generative AI is prohibited. A formative version with the same format opens beforehand, and its randomised questions can be attempted repeatedly for feedback.
Questions may draw on any part of the module, from model assumptions and calculations to the experiments run in the practicals, so preparation means calculating, predicting and explaining rather than rereading.
EART60071 cheatsheet for the final exam
AskSia publishes a free EART60071 cheatsheet for the final exam, an open-book exam sheet that follows the official permitted-materials rule for this assessment and condenses the topics in this guide.
Worked example · free
Classify air stability from a lifted parcel
- 1Parcel: 290 − 10 × 0.5 = 285 K in every case, because the parcel cools at its own rate whatever the surroundings.
- 2Environments: 290 − 7 × 0.5 = 286.5 K, 290 − 10 × 0.5 = 285 K and 290 − 13 × 0.5 = 283.5 K.
- 2At 7 K per km the parcel is 1.5 K colder and denser, so it sinks back: stable. At 10 K per km it matches its surroundings: neutral. At 13 K per km it is 1.5 K warmer and keeps rising: unstable.
Key terms
- Lagrangian frame
- A way of describing a model in which variables travel with a moving parcel or object along its path.
- Eulerian frame
- A way of describing a model in which variables are stored at fixed grid points that material moves between.
- Forward Euler method
- A numerical scheme that advances a solution by extrapolating the gradient at the start of each time-step across the step.
- Convergence
- The approach of a numerical solution towards the exact solution as the time-step or grid spacing is reduced.
- Numerical diffusion
- Artificial smoothing and spreading of a transported feature that comes from the numerical scheme rather than the physics.
- CFL number
- The ratio of distance moved in one time-step to the grid spacing, which must not exceed one for the upwind scheme to stay stable.
- Dry adiabatic lapse rate
- The cooling rate of a rising unsaturated parcel, about 9.8 K per km and rounded to 10 in the module exercises.
- Saturation vapour pressure
- The equilibrium vapour pressure over a flat liquid water surface, which rises steeply with temperature.
- Köhler relation
- An expression for the equilibrium humidity of a solution droplet that combines the solute effect with the curvature effect.
- Cloud condensation nuclei
- Aerosol particles on which water vapour condenses to form cloud droplets once the air is sufficiently supersaturated.
- Gaussian plume model
- An empirical dispersion model that describes a time-averaged plume as Gaussian profiles whose widths depend on stability.
- Geostrophic wind
- The wind that results when pressure-gradient and Coriolis forces balance, blowing parallel to the isobars.
- Relative vorticity
- The local spin of a fluid element, positive when anticlockwise and present in shear as well as in circling flow.
EART60071 FAQ
How hard is this module?
The challenge is breadth with a single deciding assessment. Everything rests on one two-hour online assessment of ten questions, and questions may draw on any of the five modelling approaches, from Forward Euler and the CFL limit to cloud microphysics and rotating fluids. The module guidance warns that rereading notes is unlikely to be enough for questions that test modelling reasoning.
How is the module assessed?
A summative online assessment carries 100% of the module mark. It is a timed two-hour Canvas assessment of 10 questions, taken under examination conditions during the examination period, with the date confirmed through the University timetable. A formative online assessment of the same format counts for 0% and exists so that you can practise and read the feedback.
What does the final online assessment look like?
Once it begins you have two hours for ten questions on Canvas, and it follows the same format as the formative assessment. The formative questions mix numerical-method questions, calculations about the environment and readings of what the practical models produced, moving from basic ideas to harder applications. Expect both calculations and explanations of model behaviour.
Is the assessment open book?
Yes. You may bring and consult your own notes. That makes preparation of those notes part of the work: with about twelve minutes per question there is little time to search, so organise them by model and by calculation, with a worked number beside each formula. Generative AI is in the prohibited category for this assessment.
Are past papers available?
The module materials do not include a past summative paper. They provide the formative online assessment, whose randomised questions can be repeated with feedback, two chapters of lecture notes with practice questions followed by worked answers, recorded worked solutions, weekly checkpoints and practical answers with example model output.
Do I need programming experience?
No previous command-line experience is assumed. The first practical teaches the small set of Linux, SSH, SFTP, Git and nano commands needed, and later practicals reuse the same routine. You run supplied Python and Fortran models and edit their inputs; the module states that it is not a course in building numerical models from scratch.
How should I revise for it?
Work the lecture-note questions without looking at the answers, then check method as well as the final number. Review your saved practical plots until you can explain each controlled comparison. Take the formative assessment, revise the weaker topics its feedback reveals, and try it again, aiming to explain why each answer is right.
Questions students ask in each EART60071 chapter
- Why does the module use models instead of only observations?
- Observations remain essential for testing theories, but in the real atmosphere you cannot hold every variable fixed and often sample only a narrow range of conditions. A model allows a controlled experiment in which one factor changes while the others stay put, and it can test interventions such as marine cloud brightening that would be impractical or ethically difficult to try for real. Chapter 01 · Environmental Models and the Practical Workflow
- Why does a smaller time-step give a more accurate answer?
- Forward Euler assumes the gradient at the start of each interval holds across the whole interval. The shorter the interval, the less the true gradient changes within it, so each step's error shrinks and the numerical solution approaches the exact one. That approach is convergence, and its price is more steps and therefore more computation. Chapter 02 · Forward Euler, Convergence and Numerical Error
- What is the CFL number and why does it matter?
- It is the speed times the time-step divided by the grid spacing, the fraction of a cell a feature moves per step. For the first-order upwind scheme it must not exceed one: above that, the solution develops growing oscillations that come from the method. In the practical the default gives 0.5, a 5 s step gives 1.0 and a 6 s step gives 1.2. Chapter 03 · Advection, the CFL Number and Numerical Diffusion
- What is the difference between the parcel and environmental lapse rates?
- The environmental lapse rate describes how the temperature of the surrounding air changes with height, as measured at one place and time. A parcel lapse rate is how a moving parcel's own temperature changes as it rises or sinks, about 10 K per km when unsaturated and about 6 K per km when saturated in the exercises. Comparing the two decides stability. Chapter 04 · Air Pressure, Lapse Rates and Humidity
- What do the two factors in the Köhler relation do?
- The first factor, moles of water over moles of water plus the van't Hoff factor times moles of solute, is the solute effect: dissolved material lowers the equilibrium vapour pressure. The exponential is the curvature effect, which raises it for small, strongly curved drops. In the module's ammonium sulphate example they give 0.833 and 0.842 respectively. Chapter 05 · Aerosol Growth, Visibility and Particulate Matter
- Why can a faster updraft produce more cloud droplets?
- A faster parcel cools more quickly in time, so supersaturation builds faster than condensation on existing drops can remove it. The higher supersaturation lets more of the smaller particles exceed their curvature threshold and activate. The practical tests this by running a tenth and ten times the default vertical velocity of 0.3 metres per second. Chapter 06 · Parcel Models and Cloud Droplet Activation
- How do I decide whether the air is stable?
- Compare the environmental lapse rate with the parcel's. If the environment cools more slowly than the parcel, a lifted parcel ends up colder and sinks back: stable. If they cool at the same rate the air is neutral. If the environment cools faster, the lifted parcel is warmer and keeps rising: unstable. Always compare at the same height. Chapter 07 · Atmospheric Stability and Gaussian Plume Dispersion
- Why can't condensation alone make rain?
- Maxwell's growth equation predicts that growing an aerosol particle to raindrop size by condensation would take tens of days, yet rain forms in about twenty minutes. Collision and coalescence fill the gap: slightly larger drops fall slightly faster, collect smaller drops in their path and grow rapidly, more efficiently the larger they become. Chapter 08 · Single-Column Models, Warm Rain and Ice
- Why is the Coriolis force called apparent?
- In an inertial frame no physical interaction produces it. It appears because the coordinate system is attached to the rotating Earth, so a body moving in a straight line as seen from space appears to curve to an observer on the ground. It is perpendicular to the motion, so it turns the air without changing its speed. Chapter 09 · Pressure Gradient, Coriolis and Balanced Flow
- Can a flow have vorticity without going round in circles?
- Yes. Vorticity measures the tendency of a small fluid element to rotate, so shear is enough: a paddle wheel in a flow that is faster on one side than the other will turn. The jet stream is the standard example, with positive vorticity on its northern flank and negative on its southern flank. Chapter 10 · Vorticity, Gravity Waves and Shallow-Water Flow
How to study for the exam
Revise EART60071 in three layers that match how its questions are built. Start with calculation fluency.
Work every question in the two lecture-note chapters with the answers covered, then check both the method and the number, and rebuild each calculation family with fresh numbers: gas law and density, two-stage lapse rates, vapour pressure, relative humidity and mixing ratio, the Köhler routine, extinction and visual range, particulate mass, pressure-gradient and Coriolis forces, geostrophic and gradient wind, vorticity and wave speed.
Next, make the numerical ideas automatic: write the Forward Euler factor and the CFL number for any scheme you meet, and practise telling numerical diffusion from instability. Then turn to interpretation. For each practical, write the scientific problem, the frame and model family, what is explicit, parameterised or omitted, and one controlled comparison with its physical explanation, using your saved plots.
Finally, take the formative assessment, use its feedback to choose topics to revisit, and retake it after revision. Because the assessment is open book, finish by turning all of this into concise notes indexed by the questions you expect to answer.